LK 250 TapWater Unit

The LK 250 TapWater Unit is a device for heating tap water.

LK 250 TapWater Unit P has an electronic controller unit that regulates the desired tap water temperature and at the same time regulates the inlet temperature to the plate heat exchanger to protect it from limestone.

The LK 250 TapWater Unit P consists of a plate heat exchanger, circulation pump, flow sensor, safety valve and an electronic controller.

The temperature of the tap water can be adjusted between 40 and 65 °C. The circulation pump only runs when hot water is required, which reduces energy consumption.

LK 250 TapWater Unit
Unlike the LK 250 TapWater Unit P, this unit has a thermic mixing valve which, instead of an electronic controller, regulates the tap water temperature and at the same time regulates the inlet temperature to the plate heat exchanger to protect it from lime­scale deposits.

The LK 250 TapWater Unit consists of a plate heat exchanger, circulation pump, flow sensor, safety valve and a mixing valve.

The temperature of the tap water can be adjusted between 35 and 65°C. The circulation pump only runs when tap water is needed, which reduces energy consumption.

When choosing a tap water unit, it is important to know the water quality in the area where the unit will be installed.

A hot water circulation kit is available as an accessory used to maintain the intended hot water temperature in the entire domestic hot water system, which is particularly suitable in buildings where a tap point is located some distance away.