LK Armatur Our websites English
Close

Our websites

LK 162 SmartStove®

LK 162 SmartStove®

  • With the alarm function in case of over temperature, you can enjoy the warmth without worrying

LK 162 SmartStove® is a biomass controller for multi-fuel water containing stoves with buffer tanks. The controller has a number of preset hydraulic systems for different installations. For indication of the ...

LK 162 SmartStove®

Variants

LK 162 SmartStove®

LK 162 SmartStove® 1 artikel

Article Type Weight (kg) Item List
181708 LK 162 SmartStove® 0.7

181708

Type LK 162 SmartStove®
Weight (kg) 0.7
Item list

Detailed Information

Description

LK 162 SmartStove® is a biomass controller for multi-fuel water containing stoves with buffer tanks. The controller has a number of preset hydraulic systems for different installations.

For indication of the active hydraulic system and the current temperatures in stove and buffer tank the controller is equipped with a coloured full graphics display which is permanently backlit.

LK 162 SmartStove® can control the charge pump of a loading unit, the circulator in a heating loop, high-efficiency pumps and an additional heat source.

FEATURES
• Acoustic alarm and indication in the display if over temperature should occur in stove or buffer tank
• A temperature sensor in the stove controls the charge pump of the loading unit which means that no fluegas thermostat is needed
• Pump delay function. The charge pump in the loading unit does not start until the stove has reached a certain temperature. This saves energy, prevents tarring and considerably prolongs the life-time of the stove
• Dynamic pump control can be activated when the loading unit is equipped with a speed-controlled pump. The pumpcontrol keeps the flow at a constant temperature
• Economy or comfort mode can be selected to optimize energy efficiency in the potable hot water boiler and/or in the heating system
• Controls an additional heat source
• Delay function for the additional heat source
• 7 hydraulic systems which can be mirrored
• 2 outputs for speed-controlled pumps with PWM and/ or analogue signal
• 6 terminals for temperature sensors
• 1 floating change-over contact
• SD card slot for data logging and software update
• Legionella prevention
• Pump exercise
• Freeze protection

Technical Data

Voltage: 230 VAC, 50 Hz
Power consumption: 3,5 VA
Protection type: IP 20
Protection class: II
Display: TFT backlit colour display, 47 x 35 mm
Triac outputs: 230 VAC ± 10%, 1 A, 200 VA
Relay output: Max. 240 VAC, 4 A
Sensors: PT 1000
High-efficiency pump: Analog output 0 -10 V, max. 10 mA
PWM output 100 Hz - 2 kHz

Application

Hydraulic System

Hydraulic System

Accessories & Spare parts

Article no. Article Position
181186 Tank sensor PT 1000 Ø 6 mm - 4 m cable 1
180812 Sensor pocket 150 mm 2